Product: | Specification of Nitrile Examination Gloves | ||||||
| Non-Sterile, Textured Surface, Ambidextrous, Powder-free | ||||||
Grade: | AQL 1.5 | ||||||
Inspection Method: | ASTM D 6319 - 00 and EN 455-1 & 2 ( 4.5 mils) | ||||||
Test On | Particular | Specification | In-house Inspection | ||||
Level / AQL. | |||||||
Dimension , mm. | Width | Extra Small | 80 ± 5 mm. | S 2 / AQL 4.0 | |||
Small | 85 ± 5 mm. | ||||||
Medium | 95 ± 5 mm. | ||||||
Large | 105 ± 5 mm. | ||||||
Extra Large | 115 ± 5 mm. | ||||||
Extra Extra Large | 120 ± 5 mm. | ||||||
Length | 240 mm minimum | ||||||
Thickness | Cuff ( 25 mm. From bead) | 0.10 ± 0.01 mm. | S 2 / AQL 4.0 | ||||
(Single wall) | Palm ( Center of palm) | 0.12 ± 0.01 mm. | |||||
Finger ( 13 mm. From tip) | 0.14 ± 0.01 mm. | ||||||
Weight (grams) | Extra Small | 4.7 ±0.3 grams | S 2 / AQL 4.0 | ||||
Small | 5.2 ±0.3 grams | ||||||
| Medium | 5.7 ±0.3 grams | |||||
| Large | 6.3 ±0.3 grams | |||||
| Extra Large | 6.8 ±0.3 grams | |||||
Tensile properties | Before Aging | Tensile Strength | min 21 Mpa. | S 2 / AQL 4.0 | |||
Elongation at break | min 500 % | ||||||
Aged 100±2 Co | Tensile Strength | min 21 Mpa. | |||||
For 24 hrs. | Elongation at break | min 450 % | |||||
Freedom from Holes | GI / AQL 1.5 | ||||||
Visual Defects | Lump ≥ 2 mm. , Drit ≥ 1.5 mm., Sticky Pleat ≥ 5 mm. , Sticky, | GI / AQL 2.5 | |||||
(Major) | Visible Hole ( Non - inflated) Discoloration , Mix Surface , Incomplete | ||||||
Bead . Wrong Orientation, Poor Donning. | |||||||
Visual Defects | Lump < 2 mm. , Drit < 1.5 mm., Sticky Pleat < 5 mm. , Rolled Bead, | GI / AQL 4.0 | |||||
(Minor) |
| ||||||
(Visible at < 2 feet) | |||||||
Powder Residue | Max 0.3 mg/ glove | SI / AQL 2.5 | |||||
Call Us